Home  >  Products
List Name
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form
SA-QY-80 Hydraulic Cable Stringing Puller Machine
SA-QY-80 Hydraulic Cable Stringing Puller Machine
1. Intelligent Control2. Smart Operation3. Smart cable4. Intelligent lubrication5. Working parameter display and setting6.“Black box” recording function7. Anti-slip, load start 
PC-55 Hydraulic Cutting Head
PC-55 Hydraulic Cutting Head
◢ Flip-open head easy access to the fitting◢ Powered by single acting hydraulic pump◢ The exact cutting capacity depends on the type of cable ◢Cutting Capacity:Max Φ55mm Cu/Al/ACSR, max Φ22mm steel bar
PC-85 Hydraulic cutting head 6t
PC-85 Hydraulic cutting head 6t
◢ For cutting copper and aluminum cables with light weight steel armored◢ Flip-open head easy access to the fitting◢ Powered by single acting hydraulic pump◢ The exact cutting capacity depends on the type of cable
TV30 DAC Test and diagnosis system  for MV cables
TV30 DAC Test and diagnosis system for MV cables
1.Compact and lightweight, one-unit solution 2.Easy WIFI or wired based automatic control 3.Built in Time Domain Reflectometer(TDR) 4.Software support OTA 5.Uses well proven DAC excitation voltage for PD measurements (acc. IEC 60270) 6.Fully integrated dissipation factor(Tan Delta) measurement at DAC voltages 7.All in one testing and diagnosis of cables up to 20 kV 8.It can be easily fit into a car/ small van with a cargo load below 100kg
PC-170 Hydraulic Cutting Head 30T
PC-170 Hydraulic Cutting Head 30T
◢ For steel wire armored cable◢ Double acting cylinder, quick oil return◢ Hardened blades, faster cutting speed
LB4/60A Smart Bridge for Cable Fault Location
LB4/60A Smart Bridge for Cable Fault Location
1.No need to analyze waveform (TDR reflection based technologies) 2.Directly show the fault distance 3.Compact and lightweight 4.Suited for prelocating difficult, high-resistive faults 5.With burning function up to 60kV 6.One knob to easy operate
PC-132 Hydraulic Cutting Head
PC-132 Hydraulic Cutting Head
◢ For cutting copper and aluminum cables with light armored cable◢ Flip top style for easy access to the fitting◢ Powered by single acting hydraulic pump◢ The exact cutting capacity depends on the type of cable
PC-45 Hydraulic Cutting Head
PC-45 Hydraulic Cutting Head
◢ Flip-open head easy access to the fitting◢ Powered by single acting hydraulic pump◢ The exact cutting capacity depends on the type of cable
ECT-120C Hydraulic Battery Cutting Tool
ECT-120C Hydraulic Battery Cutting Tool
1.Output Force:20T 2.Rated Pressure:700bar 3.Automatic pressure-release 4.Cutting Capacity:Max Φ120mm Cu/Al Max (35kV)3x400mm2 armored cable
PC-30C Hydraulic Cutting Head
PC-30C Hydraulic Cutting Head
◢ C-type opening for easy access to the fitting◢ Powered by single acting hydraulic pump◢ The exact cutting capacity depends on the type of cable
PC-40 Hydraulic Cutting Head
PC-40 Hydraulic Cutting Head
◢ Cut copper flat wire of transformer◢ C-type opening for easy access to the fitting◢ Powered by single acting hydraulic pump◢ The exact cutting capacity depends on the type of cable